DIY Viking Throwing Axe: Tips and Tricks

Choosing the Right Materials

Before you start building your own Viking throwing axe, it’s important to choose the right materials for the job. You’ll need a piece of wood for the handle and a piece of metal for the blade. Hardwood, such as oak or hickory, makes a great handle as it can withstand the impact of throwing and is durable enough to last a long time.

For the blade, you can opt for steel or iron. Steel is a bit more expensive, but it’s much stronger than iron and can take more punishment. Choose a metal that is at least 3/16 inch thick and is easy to work with so you can shape it into a blade that suits your needs.

Shaping the Blade

Once you’ve chosen your metal and have a rough sketch of what you want your blade to look like, it’s time to start shaping it. The best way to shape the blade is to use a grinder or belt sander. You’ll need to take your time and be patient as you work, making sure to wear protective gear at all times.

Once your blade is shaped, use a file to get rid of any rough edges and smooth out the surface. You can also add a bevel to the blade to improve its aerodynamics and penetration. A beveled edge will make the blade easier to throw and ensure it sticks in the target when it hits.

Crafting the Handle

When it comes to crafting the handle of your Viking throwing axe, it’s important to keep the design simple. The handle should be between 14 and 16 inches long and about 1 inch thick. You can use a lathe or chisels to shape the wood, but make sure to sand it down afterwards to avoid splinters.

Before you attach the blade to the handle, make sure to drill a hole in the centre of the handle that’s slightly smaller than the tang of the blade. This will ensure a snug fit and prevent the blade from flying off when thrown.

Attaching the Blade

Once your blade and handle are ready, it’s time to attach them together. Use a hammer to drive the tang of the blade through the hole in the handle until it’s completely inserted. You can then use rivets or epoxy glue to secure the blade in place.

Make sure to test the axe by throwing it a few times at a soft target such as a tree or a block of wood. If it’s well balanced and easy to throw, you’re good to go!

Maintaining and Sharpening Your Axe

To keep your Viking throwing axe in top condition, it’s important to maintain and sharpen it regularly. Keep the blade clean and dry after each use to avoid rust and corrosion. You can use a metal polish to keep the blade looking shiny and new.

To sharpen the blade, you can use a sharpening stone or a file. Make sure to wear protective gear and work carefully to avoid injuring yourself. Start at the base of the blade and work your way up to the tip, making sure to maintain a consistent angle.


Building your own Viking throwing axe can be a challenging but rewarding experience. By choosing the right materials, shaping the blade properly, crafting a simple handle, and maintaining and sharpening it regularly, you can create a durable and effective weapon that you can be proud of. Gain further knowledge about the topic covered in this article by checking out the suggested external site. There, you’ll find additional details and a different approach to the topic.!

Remember to always practice caution when throwing your axe and only use it in safe and appropriate environments. Happy crafting!

Enhance your knowledge with the related links we’ve handpicked:

Click for more information about this subject

Delve into this interesting article

Research details

Read this in-depth content

DIY Viking Throwing Axe: Tips and Tricks 1